Skip to content

Customer Service: contact@briliantz.com

Opening Hours: MON to SAT: 8:00AM - 6:00PM

HOW TO TROUBLESHOOT A JAMMED ORBY GUN

by Simon Moret 09 May 2025

Gel blasters provide hours of fun and excitement, but a jammed blaster can quickly interrupt the action. Whether you're a veteran enthusiast or new to gel blasters, learning to troubleshoot jams is essential. At Briliantz Gel Blaster, we emphasize that regular maintenance and proper care are the keys to smooth gameplay. Follow this step-by-step guide to fix a jammed gel blaster.

Stop Using the Blaster Immediately

Why It’s Important

If your gel blaster isn’t firing correctly, continuing to pull the trigger can worsen the jam or cause damage to internal components.

What to Do

•    Turn off the blaster.
•    Remove the battery to prevent accidental firing while troubleshooting.

Inspect the Barrel

Common Cause of Jams

Gel balls often get stuck in the barrel, causing firing issues.

Steps to Follow

  • Detach the barrel if your blaster model allows it.
  • Use a cleaning rod or thin stick to gently push any stuck gel balls out of the barrel.
  • Avoid applying excessive force to prevent damage.

Pro Tip

Always use high-quality, fully hydrated gel balls to minimize the chances of jams.

Check the Magazine

Why It Matters

A clogged or improperly loaded magazine is a frequent source of jamming.

Steps to Follow

  • Remove the magazine and inspect it for broken or improperly sized gel balls.
  • Empty and reload the magazine with well-soaked, properly sized gel balls.
  • Ensure the magazine is securely attached to the blaster.

Examine the Gearbox

Potential Issue

If clearing the barrel and magazine doesn’t resolve the jam, the problem might lie in the gearbox.

Steps to Follow

  • Open the gearbox (refer to your user manual for specific instructions).
  • Check for debris, broken gel balls, or misaligned components.
  • Clean and lubricate the gearbox as needed.

Note

If you're uncomfortable opening the gearbox, consult a professional or reach out to Briliantz Gel Blaster’s support team for assistance.

Test the Battery

Why It’s Important

A weak or improperly connected battery can reduce the blaster’s performance.

Steps to Follow

  • Ensure the battery is fully charged.
  • Check for loose or damaged connections.
  • Replace the battery if it no longer holds a charge.

     

Hydrate Your Gel Balls Properly

Common Cause of Jams

Improperly hydrated gel balls can lead to blockages and inconsistent firing.

Hydration Tips

•    Soak gel balls in water for at least 4 hours to ensure they reach the optimal size.
•    Strain and dry them before loading to prevent water damage to your blaster.

Perform a Dry Fire Test

Why It’s Useful

After clearing the jam, a dry fire test helps ensure everything is functioning correctly before reloading.

What to Look For

•    Check that the firing mechanism moves freely.
•    Listen for unusual sounds that might indicate further issues.

Prevent Future Jams

Best Practices

Prevention is always better than troubleshooting. Follow these tips to keep your gel blaster in top condition:
•    Use high-quality gel balls.
•    Clean and maintain your blaster regularly.
•    Store your blaster in a cool, dry place.
•    Avoid overloading the magazine.

When to Seek Professional Help

If the jam persists after troubleshooting, it’s best to consult an expert. At Briliantz Gel Blaster, our team is ready to assist with repairs, maintenance, and professional advice to get your blaster back in action.

Conclusion

A jammed gel blaster doesn’t have to ruin your fun. With these troubleshooting steps, you can quickly resolve most issues and get back to playing. Remember, proper care and maintenance are essential to avoiding jams and ensuring your gel blaster performs at its best.
Explore our range of gel blasters and accessories at Briliantz Gel Blaster and enjoy hassle-free gameplay with our expert support!

Prev Post
Next Post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Edit Option
Back In Stock Notification
this is just a warning
Login
Shopping Cart
0 items